UK time:

Cirrus Plus

The Cirrus Plus is a state of the art pharma-isolator dedicated to the development and production of drugs and sterile foods for patients, as well as the analysis of highly pathogenic samples in an extremely sterile environment. Available in three different sizes, the Cirrus Plus can be configured in positive pressure for the protection of samples or in negative pressure for protection of the user and environment. The chamber is kept sterile by means of acid or H²O² sterilisation and the ventilation of filtered air. The H14 input filter is efficient to 99.999% of 0.3µm particles per cubic foot.

Intuitive Design

The fully digital keypad is located at eye level in an easy-to-reach position, making it simpler for the user to operate. Furthermore, the chamber is fully transparent on all four sides, meaning the user is working in natural light and thus minimises strain on the eyes. In addition to this, the transparent sides allows a supervisor to monitor the user's work.

The Cirrus Plus is also equipped with a sliding shelf between the manipulation and transfer chamber making it easy to move items around without straining the muscles of the use. The sliding shelf has holes to allow the steriliser to easily reach the underside.

Users can choose to have their Cirrus Plus made of either polyester powder coated steel or stainless steel.

Customised For Your Requirements

Fully customised and adapted for your needs, the Cirrus Plus isolator has a variety of optional extras available. Users can choose to equip their isolator witht the following features:

  • 2, 3 or 4 gloves in a linear position or facing each other
  • Positive or negative pressure inside the chamber
  • Automatic pressure control
  • Pressure and temperature traceability
  • Optional ColourSafe™ system to prevent the user from inadvertently opening a transfer door
  • Storage shelves of various dimensions
  • Different sized gloves
  • Different sleeve materials available
  • Optional stainless steel body for efficient cleaning and durability
  • Adjustable stand for users of different heights
  • Transfer chambers or input-output containers
  • Double Door Transfer Port (DDTP)
  • Various output facilities such as thermo-shielded bags and trap doors
  • Suspension bars
  • Steriliser

Double Door Transfer Port

The Double Door Transfer Port (DDTP) is used to introduce items into the isolator through a sterile connection port:

The outside of the isolator is contaminated by the surroundings (shown below in red). Both the inside of the isolator and the transfer chamber are sterile.

DDTP4 bigger

The transfer chamber is then connected to the isolator and the contaminated part on the transfer chamber door is supressed within a seal between the door of the isolator. Both the door of the isolator and the transfer chamber are now inter-locked and will open as one single door.

DDTP5 small

The door can now be opened and the item inside the transfer chamber can be introduced to the isolator without the risk of contamination.

DDTP6 small

Installation

To ensure that your equipment is operational immediately upon arrival, an MSE engineer will install it on site and carry out the necessary validation procedures. The user will be fully trained to work on the Cirrus Plus and any bulky equipment to be used inside the chamber will be installed through the back service port.

Specifications

Specifications
Power Consumption 700W (main + 1 transfer chamber)
Bodywork Material PMMA hard body or glass and stainless steel
Base Stant Material Steel with polyester-powder coating or stainless steel
Shelves Stainess steel
Internal Pressure Range -100 to +100 Pascal or -250 to +250 Pascal
Internal Airflow Range 1 to 50 inside air renewal cycle/h
Cirrus Plus 1200 Dimensions
Internal Isolator Chamber
Height  650mm
Width  1200mm
Depth  650mm
Internal Transfer Chamber
Height  500mm
Width  500mm
Depth  500mm
External Dimensions (Isolator + Transfer Chamber)
Height  2000mm
Width  1750mm
Depth  780mm
Cirrus Plus 1500 Dimensions
Internal Isolator Chamber
Height  650mm
Width  1500mm
Depth  650mm
Internal Transfer Chamber
Height  500mm
Width  500mm
Depth  500mm
External Dimensions (Isolator + Transfer Chamber)
Height  2000mm
Width  2550mm
Depth  780mm
Cirrus Plus 2000 Dimensions
Internal Isolator Chamber
Height  650mm
Width  2000mm
Depth  650mm
Internal Transfer Chamber
Height  500mm
Width  500mm
Depth  500mm
External Dimensions (Isolator + Transfer Chamber)
Height  2000mm
Width  2550mm
Depth  780mm

 

Ordering Information

Model Description
MNP120.PX1.2 Cirrus Plus 1200 Bespoke Pharma-Isolator (240V 50Hz)
MNP150.PX1.2 Cirrus Plus 1500 Bespoke Pharma-Isolator (240V 50Hz)
MNP200.PX1.2 Cirrus Plus 2000 Bespoke Pharma-Isolator (240V 50Hz)

Our team is always ready to assist you with any questions you may have

CONTACT US
Visit Us

57 Kangley Bridge Road
Lower Sydenham SE26 5BA

Get Directions
Contact MSE

Phone: +44 (0)20 8663 4610
Fax: +44 (0)20 8659 7491

Email: info@mseuk.co.uk
Open Hours

Monday - Friday: 8AM - 5PM
Saturday/Sunday: Closed

Status: Closing soon!